2*3 Touch Switch Specific Use Needs to Pay Attention to the Local Introduction
Release time：2019-10-08 Clicks： Click
2*3 touch switch can be used in many places. What should be noticed in specific use? Let's give you a detailed introduction.
What problems should we pay attention to when using 2*3 light touch switch? This kind of switch has been used more in everybody's daily life, but some friends reflect that they are always easy to break down when using this switch, which is probably due to their incorrect operation, or not doing something to pay attention to when using it. Here I want to ask you to pay attention to a problem, that is, there will be more models of this switch. When different types of switches are used, there may be some requirements according to the direction of this switch. Some switches require vertical pressing from top to bottom, and some switches require left to right pressing, etc. Then when using this switch, the actual parameters of this switch should be based on. In order to make the switch durable and not easy to damage, the correct operation mode may lead to serious wear and tear of the switch, leading to its performance degradation or even damage. Here are some other issues to be noted when using this switch.
Usually use 2*3 light touch switch the second thing to pay attention to is not to use a lot of force, we know that the switch is relatively small, although the switch itself can bear a certain weight, but the weight will have a upper limit, if the usual use of this switch when the power is very large, or even far beyond the switch can bear. The greatest strength to bear. It is very likely that this switch will suddenly be damaged. For example, when some people use the equipment with this switch, they may not cherish it. When they turn on or off, they may knock hard and hit hard. This will easily lead to the slow deformation of the spring sheet in the switch and the slow damage of the spring sheet due to excessive force, which will make the switch malfunction when it is running. So even though this switch has good performance, we must cherish it when we use it.
Usually the use of 2*3 light touch switch has another problem to pay attention to is that the switch should be installed in the correct position, because this switch has some requirements for the installed circuit, if not according to the correct circuit to install, then the switch installed after it may not be able to normal operation or when the switch is running, because of electricity. The current and voltage in the circuit can not satisfy the requirement of the switch at all, so the switch will be more easily aged or damaged. It should also be noted that some types of switches may not be particularly good in moisture-proof ability, or have some requirements on the environment when they are used, so they must be used in accordance with the requirements of the use environment of the switch, do not use the switch in some unsatisfactory situations, otherwise it may lead to switch damage, or may lead to corresponding. Equipment was affected.
2*3 Touch switch in ordinary use need to pay attention to the problem, on the simple introduction to you here. Friends in the purchase of this switch, usually accompanied by instructions, in the instructions there are some points for attention to use, and then decide to install, use this switch before you should read carefully, the instructions strictly in accordance with the requirements of the instructions above to use, so that this switch can be used in the most correct place, so that the switch can play out for you. Maximum effect.